Siemens Solar Panels direct from Bullnet

main top
quick tour
language
main nav

Solar Technology Today
Photovoltaic power can be produced in many ways, with widely varying efficiency and costs. They can be divided into two basic groupings: discrete cell technology and integrated thin film technology.
 

Discrete Cell Technology

Single-crystal silicon
 
Sliced from single-crystal boules of grown silicon, these wafers/cells are now cut as thin as 200 microns. Research cells have reached nearly 24-percent efficiency, with commercial modules of single-crystal cells exceeding 15-percent.

Multicrystalline silicon
Sliced from blocks of cast silicon, these wafers/cells are both less expensive to manufacture and less efficient than single-crystal silicon cells. Research cells approach 18-percent efficiency, and commercial modules approach 14-percent efficiency.

Edge-defined film-fed growth ribbons
Nearly single-crystal silicon ribbons grown from a crucible of molten silicon, drawn by capillary action between the faces of a graphite die.

Dendritic web
A film of single-crystal silicon pulled from a crucible of molten silicon, like a soap bubble, between two crystal dendrites.

Gallium Arsenide (GaAs)
A III-V semiconductor material from which high-efficiency photovoltaic cells are made, often used in concentrator systems and space power systems. Research cell efficiencies greater than 25 percent under 1-sun conditions, and nearly 28 percent under concentrated sunlight. Multijunction cells based on GaAs and related III-V alloys have exceeded 30-percent efficiency.


Integrated Thin Film Technology

Copper Indium Diselenide (CuInSe2, or CIS)
A thin-film polycrystalline material, which has reached a research efficiency of 17.7 percent, delivers the highest completed module efficiency for full sized power modules, reaching over 11 percent.

Amorphous Silicon (a-Si)
Used mostly in consumer products for solar watches and calculators, a-Si technology is also used in building-integrated systems, replacing tinted glass with semi-transparent modules. The primary issue with a-Si technology remains the low efficiency and associated greater requirement for space and higher array installed cost and weight

Cadmium Telluride (CdTe)
A thin-film polycrystalline material, deposited by electrodeposition, spraying, and high-rate evaporation.Small laboratory devices approach 16-percent efficiency, with commercial-sized modules (7200-cm2) measured at 8.34-percent (NREL-measured total-area) efficiency and production modules at approximately 7 percent.

Next:
Advantages of Photovoltaic Power

 

 Siemens Solar panels

WIRELESS  CCTV CAMERAS INNOVATIONS  STORE HUNTER WELLIESWIRELESS  CCTV CAMERAS INKJET CARTRIDGES WIRELESS  CCTV CAMERAS INNOVATIONS  STORE HUNTER WELLIES AIR RIFLES AND BB GUNS VELOSOLEX SEEDS   CROSSBOWS MAMOD STEAM ENGINES COP CCTV   VITAMINS  SOFTWARE TONER CARTRIDGES WATCHES PUMPS RADAR DETECTORS HOMECCTV GAMO GUNS    NIGHT VISION  MAGIC AND GAMES HERBAL HIGHS BULL ELECTRICAL FLYBIRD OPTICAL BIKES & SCOOTERS OPTICAL STORE   HYDROPONICS STORE SOFTWARE STORE   VACUUM STORE   AUCTION SITE   PREMIUM BONDS   HOLIDAY HOMES  PMR RADIOS SPY SHOP   STICKY LABELS  TINPLATE TOYS SPANISH GOLF VILLA  SAXOPHONES  MARC JAMES  SUNNYCOTT